EJOT Solar Flashing for
Three Tab Asphalt Shingle Roofs
EJOT Solar Flashing is the ideal solution for PV and solar thermal installations on residential buildings with asphalt three tab shingle roofs and wood substructure or rafters. The EJOT Solar Fastening System for three tab asphalt shingle roofs includes the application-specific designed flashing, manufactured from 0.04 anodized aluminum; and the fastener made from 304 Stainless Steel, the EJOT JA3-SB-8.0x80/70 E22/3).
Download the EJOT questionnaire to find out which EJOT product and size you need for your project.
Secure sealing - through all three layers!
1st layer: sealing between flashing and fastener
Sealing area between fastener and EJOT solar flashing is elevated.
Increased security compared to flashings with sealing feature in the rain water-bearing layer.
Sealing with the washer takes place at the cylindrical part of the JA3 fastener – no capillary action is possible at the shank of the fastener.
2nd layer: sealing between flashing and upper shingle layer
Additional sealing below the EJOT solar flashing.
Pre-positioned structured foam sealing adapts to the surface of the asphalt shingle.
Correctly tightened, the sealing ring is pressed against the shingle.
3rd layer: sealing of the penetration through the second shingle layer
Additional sealing in the third layer (bottom shingle) with conical shaped sealing washer.
Defined compression of the sealing elements in all layers
No need to use additional sealants
No need to shim under the flashing with extra asphalt to level out the surface
Your advantages
Only two preset components – one fastener, one flashing.
Applicability to all common mounting systems and strut rails (attached directly or with L-foot/adapter plate).
High product quality through strict quality controls.
Usage of weather resistant materials (anodized aluminum, stainless steel 304 and EPDM).
Competent technical consulting services
Installation
Simple, secure, fast and labor-saving installation process.
Predrilling and preparation of the cutout in one simple step
Precise defined depth (control) stop.
Perfect setup of the fastener's installation depth and reliable sealing characteristics is included in the proven EJOT Solar Fastening System.
Fastening position:
Unique sealing system allows positioning close to, or even right on a low between two highs - without shimming.
Stability of the flashing:
High stiffness through specially shaped emboss.
Load transfer:
Secure transmission of all loads into the substructure.
Force transfer and quantity of required fasteners can be evaluated easily with support from licensed professionals (i.e. licensed solar installers, engineers and racking manufacturers).
Individual positioning of the Fastener:
Close to, or even right on a low between two highs - without shimming.
EJOT Click & Drill Hole Saw
Use the EJOT Click & Drill Hole Saw for optimal installation preparation.
Preparation of the assembly position in just one step.
Easy ejection of the debris.